-
E-LTM2408 Biaxial Mat for Open Mold and Close Mold
E-LTM2408 fiberglass biaxial mat has 24oz fabric(0°/90°) with 3/4oz chopped mat backing.
Total weight is 32oz per square yard. Ideal for marine,wind blades,FRP tanks, FRP planters.
Standard roll width:50”(1.27m). 50mm-2540mm available.
MAtex E-LTM2408 biaxial (0°/90°) fiberglass is produced by JUSHI/CTG brand roving,which guarantees the quality.
-
Quadraxial (0°/+45°/90°/-45°) Fiberglass Fabric and Mat
Quadraxial(0°,+45°,90°,-45°) fiberglass has fiberglass roving running in 0°,+45°,90°,-45° directions, stitched together by polyester yarn into a single fabric, without affecting structural integrity.
One layer of chopped mat(50g/m2-600g/m2) or veil(20g/m2-50g/m2) can be stitched together.
-
Tri-axial (0°/+45°/-45° or +45°/90°/-45°) Glassfiber
Longitudinal Triaxial (0°/+45°/-45°) and Transverse Triaxial (+45°/90°/-45°) fiberglass cloth is a stitch-bonded composite reinforcement combining roving oriented in commonly 0°/+45°/-45° or +45°/90°/-45° directions (roving also can be randomly adjusted between ±30° and ±80°) into a single fabric.
Tri-axial fabric weight: 450g/m2-2000g/m2.
One layer of chopped mat(50g/m2-600g/m2) or veil(20g/m2-50g/m2) can be stitched together.
-
Weft Unidirectional Glass Fibre Fabric
90° weft transverse unidirectional series,all bundles of fiberglass roving are stitched in weft direction (90°), which normally weighs between 200g/m2–900g/m2.
One layer of chop mat(100g/m2-600g/m2) or veil(fiberglass or polyester: 20g/m2-50g/m2) can be stitched onto this fabric.
This product series are mainly designed for pultrusion and tank,pipe liner making.
-
Roving for FRP Panel 2400TEX / 3200TEX
Fiberglass assembled panel roving for FRP panel, sheet production. Suitable for production of transparent and translucent panel, by continuous panel laminating process.
Good compatibility and fast wet out with polyester,vinyl-ester and epoxy resin systems.
Linear Density: 2400TEX / 3200TEX.
Product Code: ER12-2400-528S, ER12-2400-838, ER12-2400-872, ERS240-T984T.
Brand: JUSHI, TAI SHAN(CTG).
-
Woven Roving
Fibreglass Woven Roving(Petatillo de fibra de vidrio) is single-end roving in thick fiber bundles that are woven in a 0/90 orientation (warp and weft), like standard textiles on a weaving loom.
Produced in a variety of weights and widths and can be balanced with the same number of rovings in each direction or unbalanced with more rovings in one direction.
This material is popular in open mold applications, commonly been used together with chopped strand mat or gun roving. To produce: pressure container, fiberglass boat, tanks and panel…
One layer of chopped strands can be stitched with woven roving, to get woven roving combo mat.
-
Powder Chopped Strand Mat
Powder Chopped Strand Mat (CSM) is produced by chopping roving into 5cm lengths fibers and dispersing fibers randomly and evenly onto a moving belt ,to form a mat,then a powder binder is used to hold fibers together, then a mat is rolled into a roll continuously.
Fiberglass powder mat(Colchoneta de Fibra de Vidrio) conforms easily to complex shapes (curves and corners) when wet-out with polyester,epoxy and vinyl ester resin, is a widely used traditional fiberglass, builds up thickness quickly with low cost.
Common weight: 225g/m2, 275g/m2(0.75oz), 300g/m2(1oz), 450g/m2(1.5oz), 600g/m2(2oz) and 900g/m2(3oz).
Note: powder chopped strand mat can compatible with epoxy resin completely.
-
Woven Roving Combo Mat
Fibreglass woven roving combo mat(combimat), ESM, is the combination of woven roving and chopped mat, stitched together by polyester yarn.
It combines the strength of woven roving and mat function, which improves FRP parts production efficiency considerably.
Applications: FRP Tanks, Refrigerated truck body, Cured in place pipe(CIPP Liner), Polymer concrete box,…
-
Biaxial (0°/90°)
Biaxial(0°/90°) fiberglass series are a stitched-bonded, non-crimp reinforcement comprised of 2 layer continuous roving: warp(0°) and weft (90°) ,total weighs between 300g/m2-1200g/m2.
One layer of chopped mat(100g/m2-600g/m2) or veil(fiberglass or polyester: 20g/m2-50g/m2) can be stitched with the fabric.
-
1708 Double Bias
1708 double bias fiberglass has 17oz cloth(+45°/-45°) with 3/4oz chopped mat backing.
Total weight is 25oz per square yard. Ideal for boat build, composite parts repairs and reinforcing.
Standard roll width:50”(1.27m), narrow width available.
MAtex 1708 fiberglass biaxial (+45°/-45°) is produced by JUSHI/CTG brand roving with Karl Mayer brand knitting machine, which guarantees outstanding quality.
-
Warp Unidirectional (0°)
Warp (0°) Longitudinal Unidirectional,main bundles of fiberglass roving are stitched in 0-degree,which normally weighs between 150g/m2–1200g/m2, and minority bundles of roving are stitched in 90-degree which weighs between 30g/m2-90g/m2.
One layer of chop mat(50g/m2-600g/m2) or veil (fiberglass or polyester: 20g/m2-50g/m2) can be stitched onto this fabric.
MAtex fiberglass warp unidirectional mat is designed to offer high strength on warp direction and improve production efficiency.
